ER5356 ke motsoako oa aluminium oa morero o akaretsang oo hangata o khethoang bakeng sa matla a ho kuta a phahameng haholo.Ho feta moo, e boetse e fana ka khanyetso e ntle ea kutu ha e pepesetsoa metsi a letsoai.ER5356 e lokela ho nahanoa bakeng sa welding 5000 series aluminium base metals.
Lits'ebetso tse Tloaelehileng: terata ea li-welding filler
| Sehlopha sa AWS: ER5356 | Setifikeiti: AWS A5.10/ A5.10M:1999 |
| motsoako: ER5356 | AWS/ASME SFA A5.10 |
| Boemo ba Welding: F, V, OH, H | Hona joale: DCEP-GMAW AC-GTAW |
| Conductivity: | 29% IACS (-0)/27% IACS (-H18) |
| Matla a Tensile, kpsi: | 38 |
| Mmala: | Bosoeu |
| Melting Point | 1175⁰F | Ho tiisa | 1060⁰F | Botenya | 0.096 lbs/cu In. |
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Tse ding | AL |
| 0.25 | 0.40 | 0.10 | 0.50-1.0 | 4.7-5.5 | 0.05-0.20 | 0.25 | 0.05-0.20 | 0.15 | Mesala |
| Mefuta e tloaelehileng ea Welding | |||||
| Diameter | Tshebetso | Volt | Amps | KHASE | |
| in | (mm) | ||||
| .030 | (.8) | GMAW | 15-24 | 60-175 | Argon (cfh) |
| .035 | (.9) | GMAW | 15-27 | 70-185 | Argon (cfh) |
| 3/64” | (1.2) | GMAW | 20-29 | 125-260 | Argon (cfh) |
| 1/16” | (1.6) | GMAW | 24-30 | 170-300 | Argon (cfh) |
| 3/32” | (2.4) | GMAW | 26-31 | 275-400 | Argon (cfh) |
| Diameter | Tshebetso | Volt | Amps | KHASE | |
| in | (mm) | ||||
| 1/16” | (1.6) | GTAW | 15 | 60-80 | Argon (cfh) |
| 3/32” | (2.4) | GTAW | 15 | 125-160 | Argon (cfh) |
| 1/8” | (3.2) | GTAW | 15 | 190-220 | Argon (cfh) |
| 5/32” | (4.0) | GTAW | 15 | 200-300 | Argon (cfh) |
| 3/16” | (4.8) | GTAW | 15-20 | 330-380 | Argon (cfh) |
Wenzhou Tianyu Electronic Co., Ltd. e thehiloe ka selemo sa 2000. Re qetile lilemo tse fetang 20 re etsa li-electrode tsa welding, lithupa le lisebelisoa tsa ho cheselletsa.
Lihlahisoa tsa rona tse ka sehloohong li kenyelletsa li-electrode tsa tšepe tse sa hloekang, li-electrode tsa tšepe tsa carbon, li-electrode tse tlase tsa welding, li-electrode tsa welding, nickel & cobalt alloy welding wires, tšepe e bonolo le lithapo tse tlase tsa alloy, lithapo tsa tšepe tse se nang tšepe, likhoele tse sirelelitsoeng ka khase, lithapo tsa aluminium tse cheselletsang, li-arc tse kentsoeng ka metsing.lithapo, lithapo tsa nickel & cobalt alloy welding, lithapo tsa tšepe tsa koporo, lithapo tsa welding tsa TIG & MIG, li-electrode tsa tungsten, li-electrode tsa carbon gouging, le lisebelisoa tse ling tsa welding & consumables.