TLHALOSO EA SEHLAHISOA:
AWS: A5.14
E Ikamahanya le Setifikeiti: AWS A5.14 ASME SFA A5.14
Mokhoa oa Weld: Mekhoa ea ho Welding ea GMAW & ASAW
ERNiCrMo-10 e sebelisetsoa ho tjheseletsa lisebelisoa tsa motheo tsa nickel-chromium-molybdenum ho tsona, tšepe le lisebelisoa tse ling tsa nickel base, le bakeng sa litšepe tse koahelang.E ka sebelisoa ho weld duplex, super duplex stainless steels.
AWS Litlhoko tsa Sebopeho sa Lik'hemik'hale
| C = 0,015 max | Cu = 0,50 max |
| Mn = 1.0 max | Ni = Se setseng |
| Fe = 3.0 max | Co = 2.0 max |
| P = 0,04 max | Cr = 14.0 - 18.0 |
| S = 0,03 max | Mo = 14.0 - 18.0 |
| Si = 0.08 max | W = 0,50 max |
| Tse ling = 0.50 max | Ti = 0,70 max |
Ka kopo, letsetsa HO BA LE LITSEBISO TSE LING LE LITEMO TSE FUMANEHANG:
Kopo
ERNiCrMo-7 e sebelisetsoa ho tjheseletsa lisebelisoa tsa motheo tsa nickel-chromium-molybdenum ho eona, tšepe le li-alloys tse ling tsa nickel le bakeng sa ho roala tšepe e nang le lisebelisoa tsa NI-CR-MO.
LITLHAKISO TSA LITŠOANTŠISO:
| Sebopeho sa Khemistri e Behiloeng % (Tlhaloso) | ||
| C = 0.01 | Kr = 16,5 | Ni = Ho leka-lekana |
| Fe = 2.20 | Mo = 15.75 | |
| E behiloe All Weld Metal Properties % (AW) | ||
| Matla a tšepe | 113,00 psi | |
| Elongation | 29% | |
DEPOSITED CHARPY-V-NOTCH IMPACT PROPERTITED:
Ha e sebetse
| Li-Parameters tsa Welding tse khothalelitsoeng bakeng sa MIG le SAW Welding ea Nickel Alloys | ||||
| Tshebetso | Diameter of Wire | Motlakase (V) | Amperage (A) | Khase |
| MIG | .035 lisenthimithara | 26-29 | 150-190 | 75% Argon + 25% Helium |
| .045 lisenthimithara | 28-32 | 180 - 220 | 75% Argon + 25% Helium | |
| 1/16 inch | 29-33 | 200 - 250 | 75% Argon + 25% Helium | |
| BONA | 3/32 lisenthimithara tse | 28-30 | 270 - 350 | Flux e loketseng e ka sebelisoa. |
| 1/8 inch | 29-32 | 350 - 450 | Flux e loketseng e ka sebelisoa. | |
| 5/32 lisenthimithara tse | 30-33 | 400 - 550 | Flux e loketseng e ka sebelisoa. | |
